30
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.2.2 Connection Using the DVI Cable
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
1 Connect the DVI cable to the [DVI IN] port on the back of the product and the DVI port on the PC.
2 Connect the DC power adapter to the product and a power socket.
Next, turn on the power switch on the PC. (For details, refer to "2.2.3 Connecting the Power".)
3 Press [ ] to change the input source to DVI.
Provided ports may vary depending on the product.
2.2.3 Connecting the Power
Connect the power adapter to [DC 14V] jack on the rear of the product.
Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product.
Plug in the power cable to the power socket.
The input voltage is switched automatically.
To Next Page
Loading...
