59
Setup and Reset
6
6 Setup and Reset
6.2 Eco Saving
The Eco Saving function reduces power consumption by controlling the electric current used by the
monitor panel.
This menu is not available when MagicBright is in Dynamic Contrast mode.
6.2.1 Configuring Eco Saving
1 Press any button on the front of the product to display the Function Key Guide.
Next, press [ ] to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Eco Saving and press [ ] on the product.
The following screen will appear.
75%: Change the monitor power consumption to 75% of the default level.
50%: Change the monitor power consumption to 50% of the default level.
Off: Deactivate the Eco Saving function.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
SETUP&RESET
Acceleration
Auto
AUTO
75%
50%
Off
Reset All
Eco Saving
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Adjust the power
consumption of the
product to save energy.
To Next Page
Loading...
