111
Setup and Reset (S22C300H / S24C300HL)
10
10 Setup and Reset (S22C300H / S24C300HL)
10.6 Key Repeat Time
Control the response rate of a button when the button is pressed.
10.6.1 Configuring Key Repeat Time
1 Press any button on the front of the product to display the Function Key Guide.
Next, press [ ] to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Key Repeat Time and press [ ] on the product.
The following screen will appear.
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
To Next Page
Loading...
