112
Setup and Reset (S22C300H / S24C300HL)
10
10 Setup and Reset (S22C300H / S24C300HL)
10.7 Source Detection
You can activate Source Detection.
10.7.1 Configuring Source Detection
1 Press any button on the front of the product to display the Function Key Guide.
Next, press [ ] to display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to Source Detection and press [ ] on the product.
The following screen will appear.
Auto: The input source is automatically recognized.
Manual: Manually select an input source.
4 Press [ ] to move to the option you want and press [ ].
5 The selected option will be applied.
To Next Page
Loading...
