Samsung S24A60S Series - Page 23

23
• When this function is available, the following may occur: flashing screen or black screen, which
depends on the type of the previous device used and the quality of the cable used. Try to use a
Samsung branded cable, and visit the website of the graphics card manufacturer to check and
update its driver with the latest version.
• A Samsung branded cable is recommended.
Connecting a PC via USB Type-C port
MST
PC Monitor 1 Monitor 2
OSD → USB Type-C:MST
Screen A Screen B
USB Type-C
Cable
DP Cable
SST
PC Monitor 1 Monitor 2
OSD → USB Type-C:SST
Screen A
Screen A
USB Type-C
Cable
DP Cable
• Make sure that the graphics card supports the MST (Daisy Chain) function. To check this, visit the
website of the graphics card manufacturer.
• When connecting a PC using USB Type-C cable, you must set DP OUT mode to "USB Type-C: MST
(SST)" on the OSD menu. (OSD – System – DP OUT - USB Type-C:MST/USB Type-C:SST)
―
The quantity of available monitors may vary depending on the cable used and the performance of the
graphics card.
• When this function is available, the following may occur: flashing screen or black screen, which
depends on the type of the previous device used and the quality of the cable used. Try to use a
Samsung branded cable, and visit the website of the graphics card manufacturer to check and
update its driver with the latest version.
• A Samsung branded cable is recommended.