92
Specifications
10
10 Specifications
10.3 General (S24E310HL / S24E410HL)
Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data
exchange between the monitor and PC system optimizes the monitor settings. Monitor installation
takes place automatically. However, you can customize the installation settings if desired.
Panel Dots (Pixels)
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm)
may be brighter or darker on the LCD panel. This does not affect product performance.
The above specifications are subject to change without notice to improve quality.
Model Name S24E310HL S24E410HL
Panel Size 23.6 Inches (59 cm)
Display area 521.28 mm (H) x 293.22 mm (V)
20.5 Inches (H) x 11.5 Inches (V)
Pixel Pitch 0.2715 mm (H) x 0.2715 mm (V)
0.010689 Inches (H) x 0.010689 Inches (V)
Power Supply AC 100 - 240 V ~ (+/- 10%), 50/60 Hz ± 3 Hz
Refer to the label at the back of the product as the standard
voltage can vary in different countries.
Dimensions
(W x H x D) /
Weight
Without Stand 561.6 x 335.7 x 93.3 mm
22.1 x 13.2 x 3.7
Inches
561.6 x 335.7 x 42.5 mm /
3.26 kg
22.1 x 13.2 x 1.7
Inches /
7.19
lbs
With Stand 561.6 x 417.5 x 200.7 mm /
4.0 kg
22.1 x 16.4 x 7.9
Inches /
8.8
lbs
MIN: 561.6 x 380.2 x
224.0 mm / 4.81 kg
22.1 x 15.0 x 8.8
Inches /
10.6
lbs
MAX: 561.6 x 510.2 x
224.0 mm / 4.81 kg
22.1 x 20.1 x 8.8
Inches /
10.6
lbs
VESA Mounting Interface 75 x 75 mm
3.0 x 3.0 Inches
(For use with Specialty(Arm) Mounting hardware.)
Environmental
considerations
Operating Temperature : 50 °F – 104 °F (10 °C – 40 °C)
Humidity : 10% – 80%, non-condensing
Storage Temperature : -4 °F – 113 °F (-20 °C – 45 °C)
Humidity : 5% – 95%, non-condensing
To Next Page
Loading...
