Samsung S24E510C

53
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged.
This option is useful when you view a movie.
Eco Saving Plus
O Timer
PC/AV Mode
Source Detection
Key Repeat Time
Power LED On
Reset All
System
Set to AV to enlarge
the picture.
O
Auto
Acceleration
Stand-by
Return
PC/AV Mode
HDMI PC
AV
Select the PC/AV
mode for the HDMI
source.
Return
-
The displayed image may differ depending on the model.
―
This function does not support Analog mode.
―
Supplied for the wide models only such as 16:9 or 16:10.
―
If the monitor is in HDMI mode and the screen says Check Signal Cable or power saving mode activates, press the JOG
button to display the function-button screen and then select the
icon. You can select PC or AV.
Conguring PC/AV Mode
1
When the Function Key Guide appears, select by moving the JOG button UP. Next, press the JOG button.
2
Move to System controlling the JOG button UP/DOWN and press the JOG button.
3
Move to PC/AV Mode controlling the JOG button UP/DOWN and press the JOG button.
4
Move to the HDMI controlling the JOG button UP/DOWN and press the JOG button.
•
Set to PC when connected to a PC.
•
Set to AV when connected to an AV device.
5
Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
6
The selected option will be applied.