18
Connecting the Power
Tidying Up the Connected Cables
Connect the corresponding cables.
Put both cables in the cable holder on the
stand (HOLDER-STAND CABLE) to organise the
cables, as shown in the figure.
Assembly is complete.
1
2
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC 14V
port on the back of the product.
‒ Rated power consumption for adapters differs depending on the model. Use an adapter that
meets the power consumption specification of the model.
2
Next, connect the AC/DC adapter to the power outlet.
3
Press the JOG Button at the bottom of the product to turn it on.
― The input voltage is switched automatically.
―
To Next Page
Loading...
