- 124 -
Anynet+ (HDMI-CEC) Issues
When Anynet+ (HDMI-CEC) isn’t working, these steps may help resolve the problem.
The problem Try this!
What is Anynet+?
You can use the product’s remote control to control external devices that support
Anynet+ (HDMI-CEC) and that are connected to the product via an HDMI cable.
For example, if a connected external device supports Anynet+, you can have the
connected device turn on or off when you turn the product on or off.
Anynet+ does not work.
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Go to Anynet+ (HDMI-CEC) and see if Anynet+ (HDMI-CEC) has been set to On.
● Settings General External Device Manager Anynet+
(HDMI-CEC)
I want to exit Anynet+.
It is inconvenient to turn on other
devices because the product
also turns on. It is inconvenient
because the connected devices
(e.g. set-top box) turn off
together.
To turn off the Anynet+ function of a device connected to the product, turn off the
Anynet+ (HDMI-CEC) function of the device.
● Settings General External Device Manager Anynet+
(HDMI-CEC)
When Anynet+ (HDMI-CEC) is turned off, the sound bar connected via the HDMI (ARC)
port does not turn off and on together with the product. To prevent a specific device
connected to the product from turning off automatically, turn off the HDMI-CEC
function on a specific device connected to the product.
To Next Page
Loading...
