Samsung S49A95 Series

16
Shortcut Key
Easily access the settings for three different modes by using the shortcut key at the bottom, without the
need of using a main on-screen menu.
• Shortcut key 1 / Shortcut key 2 / Shortcut key 3
Shortcut key 2
Shortcut key 3
Shortcut key 1
Parts Description
Shortcut Key
PBPSource Switch USB
• Shortcut Key for Switching to a Source
This button is a shortcut for switching to a different source.
‒ When the source is switched, the USB connection will be
changed at the same time according to the settings of USB
Source Setup.
‒ When PBP is On, only the source of the main screen can be
switched.
• Shortcut Key for PBP On-Off
This button is a shortcut for the PBP On-Off function.
‒ If there is no source for monitor, this button is disabled. The
PBP On-Off item is also disabled and appears dimmed in OSD.
• Shortcut Key for Switching USB / LAN
This button is a shortcut for switching a USB device/ LAN to a
different input source.
‒ The button is enabled only when PBP is On.
If you press this button when PBP is Off, the message Only
applied while PIP or PBP mode. appears and nothing happens.
Synchronously, The Switch USB item in OSD is also disabled
and appears dimmed.
‒ If you press this button when PBP is On but there is no input
source, nothing happens.