- 7 -
Preparations
Installation
Attaching the Stand
" Before assembling the product, place the product down on a flat and stable surface so that the screen is facing
downwards.
" Disassembly is the reverse order of assembly.
1 2
Put the stand base onto the stand neck
as the direction shown in the figure.
Check that the stand neck is firmly
connected.
Tightly fasten the connecting screw at
the bottom of the stand base.
3
4
Push the assembled stand into the main body in the direction of the arrow as
shown in the figure.
Stand up the monitor as shown in the
figure.
5
6
Separate the box from the product. Stand assembly is complete.
To Next Page
Loading...
