Samsung S630 - Shutter Close Time Adjustment

61
Ⅲ.ADJUSTMENT
< Description of TXT file >
When making or modifying the program, see the following program codes.
When modify the program, use the Memo Pad of Windows and save it as"STS373ADJ.txt"
// PM Batch Test 8 //
// adj control
adj_control check_process_id 65535
adj_control set_process_id 65534
adj_control save_e2prom 1 // save eeprom
adj_control save_data_file 1 // save csv...
adj_control save_process_pass 1
adj_control batch 1 // enable 8 adj...
adj_control osd_delay 0 // OSD Disable
adj_control signal 500// start signal
//adj_control signal 300// start signal
//adj_control signal 300// start signal
//======================================#5.Shutter Closing
mode program
ae evc 12
adj_sh_close max_count 20
adj_sh_close init_linedelay 13
adj_sh_close init_subdelay 0
adj_sh_close gain_skip1 0 //0:enable
adj_sh_close gain_skip2 0 //0:enable
adj_sh_close gain_setlvalue 208 // 208/16=13Lv
adj_sh_close gain_offset -5 // (5000K -> 3300K)
adj_sh_close gain_adjustrange1 15
adj_sh_close gain_adjustrange2 15
adj_sh_close run
delay 10
//adj_control signal 1500
poweroff zoom_close