62
Ⅲ.ADJUSTMENT
7) FLASH ADJ
After changing the MAIN PCB and SUB PCB, adjust the FLASH.
< How to adjust >
a...Arrange a 18% reflect chart in a darkroom.
b...Arrange a camera in a darkroom. (Use TRIPOD)
c...The distance between the reflect chart and the camera should be 80cm.
d...Download the program and save it to SD memory card.
e...Insert the SD memory card that has the program file and turn on the camera.
f...The adjustment will be done automatically.
g...After completing the upgrade, the camera is turned off automatically.
To Next Page
Loading...
