• If you press the button and then press the down directional button or press the button while viewing a
program, the Recordings, Schedule Manager, Timeshift, Stop (when Record or Timeshift is running), Info, red,
green, yellow and blue options appear.
Record and Timeshift may not be supported depending on the model or geographical area.
Select the Move to the top button to move the menu to the top.
This function may not be supported depending on the geographical area.
• Underneath these 2 buttons are a round button and a large outer circle button. The round button is the Select
button, and the large outer circle button consists of 4 directional buttons (up / down / left / right).
• Underneath the directional button are 3 buttons, one on the left, one on the right, and one in the center. The one
on the left is the button and the one on the right is the button. The round button in the middle is the
button.
• If you press the button while watching a TV program, the screen you are watching stops and a control bar
appears. You can select Rewind, Play, Pause, Fast Forward, Stop Timeshift, Record, Go to Live TV, or Info. You can
press the up directional button to go to the playback screen and check the time that the actual broadcast
program is running and the timeshift time.
You can use the Slow Rewind or Slow Forward functions when you select the Pause option.
To use Record or Timeshift, you must connect a USB device.
This function may not be supported depending on the model or geographical area.
• Underneath the button are 2 thin horizontal buttons. These buttons protrude higher above the surface than
the other buttons on the remote control. The one on the left is the volume button and the one on the right is the
channel button. Push up from beneath or down from above to use these as rocker buttons to change the channel
or volume.
– Briefly press the
(Volume) button to mute the sound.
– Press and hold the (Volume) button to open the Accessibility Shortcuts menu.
– Briefly press the (Channel) button to open the Guide.
– Press and hold the
(Channel) button to open the Channel List.
This function may not be supported depending on the model or geographical area.
- 220 -
To Next Page
Loading...
Need help?
General