2.
Enter the required settings for connecting the computer remotely.
The image on your TV may differ from the image above depending on the model and geographical area.
1.PC/Prole
Enter the IP address or of the PC you want to connect to.
• In case of Windows, when the computer to connect is within the same network (router/AP), run “cmd" command
in Settings
Network and Internet View Network Properties or in Start Run, and then run “ipconfig” to
check the IPv4 address of the computer.
• In case of Mac, you can check the IP address in Settings Remote Access.
• When the TV and computer are not within the same network, it is required to know the public IP and configure
the router and AP. Check whether the router connected to the computer supports port forwarding. When the
company provides additional security features such as firewall, seek help from a security officer.
Home
- 71 -
To Next Page
Loading...
Need help?
General