Anynet+ (HDMI-CEC) Issues
When Anynet+ (HDMI-CEC) isn't working, these steps may help resolve the problem.
What is Anynet+?
You can use the TV's remote control to control external devices that support Anynet+ (HDMI-CEC) and that are
connected to the TV via an HDMI cable. For example, if a connected external device supports Anynet+, you can have
the connected device turn on or off when you turn the TV on or off.
Anynet+ does not work. The connected device is not displayed.
Make sure the device is an Anynet+ (HDMI-CEC) device. From the settings menu on the device, check and
that the HDMI-CEC option is enabled.
From the TV, check and that the Anynet+ (HDMI-CEC) feature is set to On.
• (left directional button) Settings All Settings Connection External Device Manager
Anynet+ (HDMI-CEC) Try Now
Check and that the device’s power cord is securely plugged in.
Check the device's HDMI cable connection.
Anynet+ (HDMI-CEC) cannot function under circumstances. (when the TV is scanning channels or
performing Factory data reset)
When connecting or disconnecting an HDMI cable, turn the TV off and then back on again.
I want to start Anynet+. I also want the connected devices to turn on when
the TV is turned on.
Check if the Anynet+ device is properly connected to the TV, and then select Anynet+ (HDMI-CEC) menu to see if
Anynet+ (HDMI-CEC) is set to On.
•
(left directional button) Settings All Settings Connection External Device Manager
Anynet+ (HDMI-CEC) Try Now
- 228 -
To Next Page
Loading...
Need help?
General
