ENGLISH
6565
✤ The Playback function works only in <Player> mode. ➥page 19
Playing back on a TV Monitor
✤ To play back a tape, the television must be
NTSC compatible. ➥page 101
✤ We recommend that you use the AC Power
adapter as the power source for the
Camcorder.
Connecting to a TV which has
Audio/Video Input Jacks
1. Connect the Camcorder to your TV with the
Audio/Video Cable.
■
The yellow jack: Video
■
The white jack: Audio(L)-mono, The red
jack: Audio(R)
■
If you connect to a monaural TV,
connect the yellow jack (Video) to the
video input of the TV and the white jack (Audio L) to
the audio input of the TV.
2. Set the [Power] switch to [PLAYER].
3. Set the [Mode] switch to [TAPE]. (SC-D375(H)/D975 only)
4. Turn on the TV and set the TV/VIDEO selector on the TV to Video.
■
Refer to the TV user’s manual.
5. Play the tape. ➥page 60
[ Notes ]
■
If you connect the cable to the AV jack, you will not hear sound from
the Camcorder's speaker.
■
If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
Playback
Tape Playback on TV Screen
SC-D371/D372
SC-D375(H)/D975
√
√
✤ <Player> ( ) ➥ 19
✤
NTSC ➥ 101
✤
Audio/Video
1.
■
:
■
: -(L)- , :
(R)
■
VIDEO
AUDIO
2. [Power] [PLAYER]
3. [Mode] [TAPE] SC-D375(H)/D975)
4. TV/VIDEO VIDEO.
■
5. ➥ 60
[ ]
■
■
Camcorder
Audio/Video
Cable
Signal flow
TV
Audio/Video
Cable
To Next Page
Loading...
Need help?
General
