Samsung SCB-6000 - Page 11

English _11
● OVERVIEW
Rear Side
Item Description

HD-SDI Video Out
terminal
BNC terminal for HD-SDI video signal output.
b
Power LED This lamp turns green when the proper power is applied to the camera.
c
C-VIDEO
Analogue video output terminal of C-Video.
Use a monitor cable for testing the camera with a portable display.
(for installation)

SETUP Switch
The switch is used for setting and adjusting the camera’s functions and
properties.
Press and hold this switch more than 2 seconds to display the main menu
on the screen.
◄
/
►
Move this switch left or right to move the cursor or change
the value in the menu.
▲
/
▼
Move this switch up or down to move the cursor in the
menu.

Press the switch to set the function in menu. To move to a sub-
menu item in the menu, press this switch.
HD-SDI
POWER
C-Video
GND
AC 24V
DC 12V
1 : GND 4 : RS-485+
2 : EXT_D/N 5 : RS-485-
3 : MD_OUT
1 2 3 4 5