English _25
● OPERATING YOUR CAMERA
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at the
same time, even when the subject is in backlight, by adopting a function of the proprietary
WN2 DSP chip.
1. When the SETUP menu screen is displayed,
select <BACKLIGHT> by using the Function
Setup switch so that the arrow indicates
<BACKLIGHT>.
2. Select a desired mode using the Function Setup
switch depending on the camera purpose.
• BLC : Enables a user to select a desired area
on a picture and view that area more clearly.
- LEVEL : Adjust level of the BLC function.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
• HLC (High Light Compensation) : If the scene contains extremely bright light areas
such as; from car headlight, the light can mask out much of the on-screen detail.
- LEVEL : Adjust level of the HLC function.
- MASK COLOR/TONE : Change the color / brightness of the masking area. (Black,
Red, Blue, Cyan, Magenta)
- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced.
• OFF : Not being used
3. Select a desired mode using the Function Setup switch.
J
Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.
When dark, the HLC is only activated when a bright light exceeding a specific size. (In NIGHT ONLY
mode).
The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY
mode).
MAIN SETUP
1. LENS DC
2. EXPOSURE
3. WHITE BAL ATW
4. SSDR ON
5. BACKLIGHT OFF
6. SSNR3 ON
7. DAY/NIGHT AUTO
8. SPECIAL
9. EXIT
►
HLC SETUP
1. LEVEL MIDDEL
2. MASK TONE
.... ....
*
.... ....
5
3. TOP
....
*
....
.... ....
30
4. BOTTOM
.... .... ....
*
....
75
5. LEFT
....
*
....
.... ....
30
6. RIGHT
.... .... ....
*
....
75
7. RETURN
►
BLC SETUP
1. LEVEL MIDDEL
2. TOP
....
*
....
.... ....
30
3. BOTTOM
.... .... ....
*
....
75
4. LEFT
....
*
....
.... ....
30
5. RIGHT
.... .... ....
*
....
75
6. RETURN
►
To Next Page
Loading...
