Samsung SCD303 - Adjusting the LCD During PLAY; Controlling Sound from the Speaker

3535
ENGLISH
Adjusting the LCD during PLAY
✤ You can adjust the LCD during playback.
✤ The adjustment method is the same procedure as used in CAMERA mode. (see page 32)
The Speaker works in PLAYER mode only.
■
When you use the LCD screen for playback, you will hear recorded sound from the built-in
Speaker.
- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.
1. Set the power switch to PLAYER mode.
2. Press (PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play, use the MENU SELECTOR to adjust the
volume.
■
A volume level display will appear on the LCD.
Levels may be adjusted between 00 to 19.
■
If you close the LCD while playing, you will not hear sound from the speaker.
Note
■
When the cable is connected to the Audio/Video jack, you cannot hear sound from the speaker or
adjust the volume.
Basic Recording
Controlling Sound from the Speaker
0 : 2 3 : 4 7
5 5 min
1 2 : 0 0 A M
J A N . 1 0 , 2 0 0 4
VOL. [ 1 1 ]
<3-2>
2
3-1
00752C SCD303 SEA (28~59) 3/2/04 11:30 AM Page 35