97
Bluetooth Options
Use Bluetooth options to view and change your phone’s
name, display supported profiles, and set visibility and
pairing.
1. From the Home screen, press
MENU
➔
Settings & Tools
➔
Bluetooth Menu
.
2. Press the
Right Soft Key
(Options)
for these options:
•My Phone Info
: Enter a custom name for your phone, visible
to other Bluetooth devices during searches. You can also view
the phone type, Status, and Address.
• Discovery Mode
: Press
On
for other Bluetooth devices to
detect your device, or
Off
for no visibility. After selecting
On
,
your phone will be discoverable for one minute, then Discovery
Mode will automatically reset to Off.
• Supported Profiles
: View a list of supported Bluetooth
profiles and their descriptions. Highlight a profile and press
View
to see a description.
• Search Setting
: Choose types of devices to search during
pairings, from All, Audio Device, PC, Phone, or Printer.
•Auto Pairing
: Choose
On
to allow your phone to pair with
other Bluetooth devices with a default device code, or
Off
to
prevent automatic pairing.
Adding a New Device
Search for a Bluetooth device and pair with it, to exchange
information between your phone and the device.
1. From the Home screen, press
MENU
➔
Settings & Tools
➔
Bluetooth Menu
➔
Add New Device
. Bluetooth turns on, if it is not
already on.
2. At the prompt “
PLACE DEVICE YOU ARE SEARCHING IN
DISCOVERABLE MODE
,” activate the target device’s
Bluetooth discoverable mode, then press
OK
.
3. Your phone searches for discoverable Bluetooth
devices and displays them.
4. Use the
Directional Key
to highlight the target
device and press
PAIR
. Follow the prompts:
• Auto Pairing
: If you enabled Auto Pairing in Bluetooth Options,
and the selected device supports it, your phone sends a default
device code to the device. At the prompt, confirm the device
code to complete pairing.
• Pairing with Passkey
: Enter a passkey, then press
SET
.
Follow the prompts on the target device to enter the same
passkey and complete the pairing.
To Next Page
Loading...
