English - 37
● CONNECTION & INSTALLATION
✽ To attach or detach the camera, refer to the picture.
*
Attaching the camera: As shown in the figure, push up the camera body and turn it in the clockwise direction
up to the end. After turning the body fully, fasten the screw on the install base.
*
Camera removal : Unscrew the bolt as shown in the figure, and then turn the unit in a counter-clockwise
direction while pushing the hook to the inner side. (The screw may not be fully separated.)
When it is not possible to turn the unit any more, remove it while pulling the camera body
toward the bottom.
<Attaching the camera>
<Camera removal>
To Next Page
Loading...
