English - 59
● SETUP
Motion Detection / Intelligence (SCP-3370 Series)
This will enable you to detect and trace a moving object. SCP-3370 series support the intelligent motion
detection feature.
For the compatibility of this feature, refer to the table below.
Model
Features Applied
SCP-2370/2370H/2330/23370H/2270/2270H OFF / MD
SCP-2370TH OFF / MD / AutoTrack
SCP-3370/3370H OFF / Detection / Tracking / Fixed/Moved
SCP-3370TH OFF / Detection / Tracking / Fixed/Moved / AutoTrack
AutoTrack :
Perform Auto Track after arriving to the preset position.
Detection
:
Perform the intelligent motion detection.
Detect Box: Display an object in a box that is detected to move in
your specifi ed type.
Detect Area : You can specify a motion detection area.
Mask Area : You can specify an exceptional area to motion
detection by masking the area.
You can set up to 4 areas, for each of which you can
change the mask coordinates.
Sensitivity : Specify the sensitivity level of the motion detection.
The lower the level is, the stronger the sensitivity becomes.
Detect Size : Specify the size of an object to detect on the screen.
The higher the level is, the greater the size becomes.
Fixed/Moved :
Detect if an existing object (on the screen) disappears or if an object appears from nowhere and
stays for a certain time.
In following situations, FIXED/MOVED detection may not work properly.
If multiple motions continue at random.
If a fixed object continues to move in the same position.
If a newly appearing object conceals another object that is moving.
5 to 15 seconds of recognition time is required if the [Intelligence] function is activated.
The focus mode will be controlled manually if [Intelligence] is enabled.
The performance of [Intelligence] may be deteriorated if the camera vibrates due to unstable installation.
z
z
-
-
-
-
-
z
M
➊
➋
➌
DETECTION
Detect Box ON
Detect Area
Mask Area
Sensitivity
Det. Size
To Next Page
Loading...
