DIRECTION : Sets the direction of the camera’s movement from the starting to
the end position. (Based on panning)
ENDLESS : Instead of shuttling between start and end positions, the camera
turns 360° endlessly while stops for the <DWELL TIME> at both positions.
SPEED : Sets the moving speed of the camera, from 1 to 64.
DWELL TIME : Sets the dwell time at the starting and ending positions, from
1 to 60 seconds.
Pattern Setup
You can manually record your pan/tilt/zoom movements to a monitoring pattern for
up to 2 minutes.
For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 20)
Select <MAIN MENU>-<AUTO SET>.
Select the pattern number.
PATTERN setup screen appears.
Select the <POSITION> and set the
pattern's starting position and press
[ENTER].
Select the <START> and move the
camera using pan/tilt/zoom.
Your manual camera actions will be
recorded for up to 2 minutes, and returns
to the previous menu automatically.
To stop manual recording and return to the
previous menu before 2 minutes, press
[ENTER].
1.
2.
3.
4.
5.
<RIGHT> <LEFT>
START START
END
END
PATTERN SET 1
<POSITION>
START
PATTERN SET 1
<POSITION>
START
To Next Page
Loading...
