Select the <START> and move the
camera using pan/tilt/zoom.
Your manual camera actions will be
recorded for up to 2 minutes, and returns
to the previous menu automatically.
To stop manual recording and return to the
previous menu before 2 minutes, press
[ENTER].
Scan Setup
You can set the SCAN operation to include a defined preset position.
For selecting and saving each menu item, refer to “How to use the keyboard controller”. (page 22)
Select <MAIN MENU>-<AUTO SET>.
Select the scan number.
SCAN setup screen appears.
Move the cursor to a number with the [
]
mark which contains a defined preset.
Press [ENTER].
[S] mark appears beside the [
] and the
corresponding preset is included in the
scan.
SCAN numbers configured for a certain page can be saved only in the corresponding
page. Make sure to save it before moving to the next page.
4.
5.
1.
2.
3.
4.
M
PATTERN SET 1
<POSITION>
START
SCAN 1
0S 1 2 3 4
5 6 7 8 9
10 11 12 13 14
15 16 17 18 19
20 21 22 23 24
25 26 27 28 29
30 31
1/16
To Next Page
Loading...
