Language
Select <LANGUAGE> and use the left/right
button to select a preferred display language.
FACTORY DEFAULTS
When selected, the <FACTORY DEFAULTS>
screen appears and you can reset all settings
to the factory default settings by selecting
the <OK>. However, the protocol, baud rate,
address and the language settings will not be
reset.
Note that the resetting the system to the
factory default will erase all settings data.
OSD COLOR
Selects the color of the on-screen display font.
PROPORTIONAL P/T
When selected <ON>, manual pan / tilt movement speed will vary proportionally to
the zoom ratio.
P/T SPEED
When selected <ON>, manual pan / tilt movement speed will be doubled.
M
FACTORY DEFAULTS
OK
CANCEL
OTHER SET
LANGUAGE ENGLISH
FACTORY DEFAULTS
OSD COLOR BW
PROPORTIONAL P/T ON
P/T SPEED [2]
AUTO CAL. OFF
D-FLIP OFF
PASSWORD OFF
To Next Page
Loading...
