7. Appuyez sur ENTER.
■
Le mois clignote.
8. Sélectionnez le mois souhaité à l’aide du bouton
UP/DOWN.
9. Appuyez sur ENTER.
■
Le jour clignote.
10. Vous pouvez régler l'année, l'heure et les minutes
en suivant la même procédure utilisée pour régler
l'année et le mois.
11. Appuyez sur ENTER une fois les minutes réglées, l'écran de réglage
disparaît. La date et l'heure sélectionnées s'affichent.
Enregistrement de la date et de l’heure
1. Vérifiez que la fonction DATE/HEURE est activée.
2. Placez le commutateur principal sur la position
CAMERA.
3. Appuyez sur la touche DATE/TIME le nombre
de fois requis.
■
Pour enregistrer uniquement la date, appuyez
une fois sur la touche DATE/TIME.
■
Pour enregistrer la date et l’heure, appuyez
deux fois sur la touche DATE/TIME.
4. Appuyez sur le bouton START/STOP pour enregistrer la date et
l’heure sur la scène à filmer.
Remar
que:
■
Si le caméscope ne conserve pas les réglages de l’horloge,
cela signifie que la pile au lithium est déchargée. (voir page 16)
■
Si la date et l’heure ont été enregistrées sur la bande, elles ne
peuvent pas être masquées lors de la lecture.
■
La fonction DATE/TIME n'est pas disponible en mode
EASY ou CUSTOM.
ENGLISH FRANÇAIS
39
Advanced Recording
7. Press ENTER.
■
The month to be reset will blink.
8. Turn the UP/DOWN dial to set the desired month.
9. Press ENTER.
■
The day to be reset will blink.
10. You can set the year, hour and minute following
the same procedure used for setting the year
and month.
11. Press ENTER after setting the minute and the clock setting screen
will disappear.
The selected date and time will then be displayed.
Recording the DATE/TIME
1. Make sure that you have set the DATE/TIME.
2. Set the power switch to CAMERA mode.
3. Press the DATE/TIME button.
■
To record the date only, press the
DATE/TIME button once.
■
To record the date and time, press the
DATE/TIME button twice.
4. Press the START/STOP button to record the DATE/TIME on your
recording.
Notes:
■
If your date and time settings are not maintained in the cam-
corder, it means the installed LITHIUM BATTERY is discharged.
(see page 16)
■
You cannot conceal the recorded date or time during playback.
■
The DATE/TIME function will not operate in EASY or CUSTOM
mode.
●
CLOCK SET
●
12:00 AM
AUG. 29, 2005
●
CLOCK SET
●
12:00 AM
SEP. 29, 2005
●
CLOCK SET
●
12:00 AM
SEP. 29, 2005
Perfectionnez vos enregistrements