Using the Linux Unified Driver Configurator
283
5. Useful Management Tools
The printer control buttons are, as follows:
• Refresh: Renews the available machines list.
• Add Printer: Allows you to add a new machines.
• Remove Printer: Removes the selected machine.
• Set as Default: Sets the current selected machine as a default machine.
• Stop/Start: Stops/starts the machine.
• Test: Allows you to print a test page to ensure the machine is working
properly.
• Properties: Allows you to view and change the printer’s properties.
Classes tab
The Classes tab shows a list of available machine classes.
• Refresh: Renews the classes list.
• Add Class: Allows you to add a new machine class.
• Remove Class: Removes the selected machine class.
1 Shows all of the machine classes.
2
Shows the status of the class and the number of machines
in the class.
To Next Page
Loading...
