To Next PageTo Next PageWhy is my Samsung All in One Printer showing a scanner locked error?
A scanner locked error indicates that the scanner can't work properly, possibly due to an abnormal home position check of the sensor when moving the scanner. Try turning the power off and then on again.
What to do if my Samsung All in One Printer says 'Paper is empty in tray'?
If your printer indicates that the paper tray is empty, it means there is no paper currently loaded. To fix this, load paper into the tray with the print side facing up.
What to do if my Samsung All in One Printer has a paper jam inside the machine?
If there's a paper jam inside the machine, it could be because the paper hasn't reached the tray1 feed sensor in the expected time after pickup. Open the scan unit and gently remove the jammed paper by pulling it straight out. If you can't find the paper there, proceed to the next step.
What to do when Samsung SCX 3205W All in One Printer toner cartridge has almost reached its estimated cartridge life?
When the toner cartridge is nearing the end of its estimated life, it is recommended to replace it.
What to do if a small amount of toner is left in Samsung SCX 3205W cartridge?
When a small amount of toner is left in the cartridge, prepare a new cartridge for replacement.
How to fix Samsung All in One Printer Fuser Unit Failure #U1-2113?
If you encounter a Fuser Unit Failure #U1-2113, it means the Fuser Unit is being transferred power. The suggested solution is to turn the machine off and then turn it back on.
Why is my Samsung SCX 3205W printing a vertical white line?
A vertical white line in printing can be caused by foreign material stuck onto the window of internal lenses. Clean the LSU window with a recommended cleaner (IPA).
What is a Samsung SCX 3205W All in One Printer scanner shading error?
A scanner shading error means the machine is not copying properly. Enter tech mode and select the “SD” menu using the Up/Dn key.
What to do if my Samsung SCX 3205W All in One Printer door is open?
If the printer indicates that the door is open, it means either the door is physically open or the door sensor is defective. Check to ensure that the door is completely closed.
How to fix Samsung All in One Printer Black LSU Unit Failure #U2-5113?
If you see a Black LSU Unit Failure #U2-5113, it means the Black LSU is experiencing an Hsync Error. To fix this, turn the machine off and then turn it back on.
General| Print Technology | Laser |
|---|---|
| Functions | Print, Scan, Copy |
| Max Print Resolution | 1200 x 1200 dpi |
| Input Capacity | 150 sheets |
| Output Capacity | 100 sheets |
| Connectivity | USB 2.0, Wi-Fi |
| Dimensions | 388 x 299 x 234 mm |
| Weight | 7.4 kg |
| Memory (Standard) | 64 MB |
| Print Speed (Black) | 16 ppm |
| Copy Speed | 16 cpm |
| Copy Resolution | 600 x 600 dpi |
| Operating Systems | Windows, Mac, Linux |
| First Print Out Time (Black) | 8.5 seconds |
| Media Sizes Supported | A4, A5, Envelope |
| First Copy Out Time (Black) | Less than 15 seconds |
High voltages and lasers are dangerous; service by trained technician only.
Safety precautions related to toxic materials and electrical hazards.
Safety guidelines for handling the product to avoid injury or damage.
Procedures and precautions for safely assembling/disassembling the printer.
Warnings about potential bodily injury if precautions are ignored.
Guidelines for preventing damage from electrostatic discharge (ESD).
General overview of product features and specifications.
General overview of product specifications in a table format.
Detailed specifications related to printing functions.
Detailed specifications related to scanning functions.
Detailed specifications related to copying functions.
Details on how the printer handles different paper types and sizes.
Information on supported operating systems and software.
List of available optional features for the printer.
Information about consumables like toner cartridges.
Compares specifications of SCX-3200/3205W with other models.
Overview of the printer's main components and functions.
Diagram and labels for the front view of the printer.
Diagram and labels for the rear view of the printer.
Diagram showing the internal mechanical layout of the printer.
Details on the paper feeding mechanism and components.
Information about the transfer roller's function and life span.
Description of the drive system and its components.
Details about the fuser unit, its components, and function.
Explanation of the Laser Scanner Unit's function and potential errors.
Details on the toner cartridge, developing method, and toner life.
Hardware specifications of the printer's engine.
Description of the Main Printed Circuit Board Assembly (PBA).
Details of the High Voltage Power Supply (HVPS) and SMPS boards.
Explanation of the firmware control algorithms for engine functions.
Control algorithm for the paper feeding process and jam conditions.
Control algorithm for transfer voltages and compensation.
Control algorithm for the fusing process and error conditions.
Control algorithm for the LSU and related error recovery.
Description of the system's software components and architecture.
Architecture of host software and firmware.
Explanation of data and control flow between host and firmware.
Further details on software components and functionalities.
Additional information on software aspects.
Further software details.
Software configuration details.
Software management details.
Software interface details.
Software update details.
Safety precautions before replacing printer parts.
Guidelines for safe assembly/disassembly procedures.
Precautions for handling Printed Circuit Boards (PBAs) safely.
Method for releasing plastic latches during disassembly.
List and details of screws used in printer disassembly.
Step-by-step guide to removing the left and right covers.
Procedure for removing the scanner unit.
Steps to remove the Operator Panel (OPE) unit.
Procedure for removing the Contact Image Sensor (CIS) unit.
Steps to remove the scanner motor.
Guide to removing the middle cover and cover-open assembly.
Instructions for removing front and rear covers.
Procedure for removing the Main Printed Circuit Board Assembly.
Steps for removing the SMPS/HVPS board.
Procedure for removing the fuser unit.
Instructions for removing the Laser Scanner Unit (LSU).
Steps to remove the drive unit assembly.
Procedure for removing the step motor.
Guide to removing the pickup roller.
Steps for removing the transfer roller.
Procedures for aligning and adjusting printer functions.
Explanation of the printer's control panel buttons and functions.
Explains the meaning of different status LED indicators.
Procedures for removing paper jams from the printer.
Instructions for entering and using the Electronic Diagnostics Control (EDC) mode.
Procedures for entering and exiting the technical mode.
Instructions for upgrading the printer's firmware.
Identifies image defects caused by roller issues and their solutions.
Step-by-step process to diagnose printer problems.
List and troubleshooting for various error codes.
Troubleshooting common printing quality issues.
Diagnosing and fixing vertical black lines or bands.
Diagnosing and fixing vertical white lines in prints.
Diagnosing and fixing horizontal black bands or stripes.
Troubleshooting black and white spots in printouts.
Addressing issues with light or faint printed images.
Troubleshooting dark printed images or black pages.
Resolving uneven print density between left and right sides.
Addressing light dark backgrounds in printouts.
Troubleshooting 'ghosting' (image repetition) at specific intervals.
Troubleshooting 'ghosting' with special media like card stock.
Resolving stained backgrounds on the printed page.
Addressing stains on the back of printed pages.
Troubleshooting issues with blank pages being printed.
Further troubleshooting for blank page printouts.
Troubleshooting issues encountered during copying.
Addressing cases where the copy output is entirely black.
Troubleshooting cases where the copy output is entirely white.
Diagnosing and resolving abnormal noises during operation.
Addressing poor or defective image quality during copying.
Troubleshooting issues related to PC scanning.
Diagnosing and fixing PC scan functionality failures.
Addressing poor or unclear image quality from PC scans.
Troubleshooting miscellaneous errors not covered elsewhere.
Resolving issues where multiple sheets are fed at once.
Troubleshooting the 'paper empty' indicator.
Addressing issues with the printer not powering on.
High-level block diagram of the printer's system.
Diagram illustrating electrical connections within the printer.
Recommended tools for performing troubleshooting.
Glossary of acronyms and abbreviations used in the manual.
List of service parts with their acronyms and explanations.
Description of standard test patterns used for evaluation.
Guidelines for selecting an appropriate installation location.
