Samsung SCX-4100 - Page 44

5-5
Samsung Electronics
Disassembly and Reassembly
Service Manual
5.4.2 Dismantle Scanner Ass’y
1. Lift the Platen Cover upward and remove it.
2. Release 8 clips (2 per side) securing the scanner
upper frame to the scanner lower frame and remove
the upper frame
3. Remove the CCD Cable, as shown below.
Platen Cover
Scan Upper
< Caution >
1. Before disassembling the scanner module
remove the 2 plastic spacers from each end of
the scanner module.
SLIDE CIS
FFC Cable