Samsung SCX-4200 Series - Exit Roller

Service Manual
Disassembly and Reassembly
5-14
Samsung Electronics
5.11 Exit Roller
1. Before you remove the Exit Roller, you should
remove:
- Scanner Unit (Refer to 5.7)
- Middle Cover Unit (Refer to 5.9)
2. Remove the Exit Gear and Bearing using a screw dri-
ver at one end then remove the shaft and rollers, as
shown below.
1
2
1
Exit Gear
Bearing
Roller Exit F/Down
Holder
Roller Exit Main
Roller Exit FR