Disassembly and Reassembly
Service Manual
5-21
Samsung Electronics
5.20 Feed Roller
1. Before you remove the Feed Roller, you should
remove:
- Middle Cover Unit (Refer to 5.9)
- LSU (Refer to 5.12)
- Drive Ass'y (Refer to 5.14)
2. Remove the two screws from the Guide Paper and
take it out.
3. Pull up the Feed Idle Bush and Feed Idle Shaft, as
shown below.
4. Remove the three screws from the Feed Bracket and
take it out.
5. Remove the Idle Gear and Feed Gear2.
To Next Page
Loading...
