Troubleshooting
Samsung Electronics 4-3
4.1.1.2 Exit Misfeed
1) Open the document cover and turn the release knob to remove the misfed documents from the exit area.
2) Close the document cover.Then load the documents back into the ADF.
4.1.1.3 RollerMisfeed
1) Open the document cover.
2) Turn the release knob so that you can easily seize the misfed document,and remove the document from the ADF or
the feed area by carefully pulling it rightwards by using both hands.
3) Close the document cover.Then load the documents back into the ADF.
To Next Page
Loading...
