Troubleshooting
Samsung Electronics 4-5
4.1.2.2 JAM1 (In the Paper Exit Area)
1) Open and close the front cover.The jammed paper automatically exits the machine.
If the paper does not exit,continue to Step 2.
2) Gently pull the paper out of the front output tray.
3) If there is any resistance when you pull the paper or the paper is not seen in the front output tray,open the rear cover.
4) Remove the jammed paper by gently pulling it straight out..
5) Close the rear cover.
6) Open and close the front cover to resume printing.
To Next Page
Loading...
