Name: Samsung SCX-4216F Series
Brand: Samsung
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Troubleshooting

Samsung Electronics 4-35

4.10.11 Ghost (3)

• Description White ghost occurs in the black image printing at 51mm intervals.

Digital Printer

47.1 mm

Check and Cause Solution

1. The life of the developer may be expired.

2. The abnormal voltage and bad contact of

the terminal of the supply roller

1. Occur in the developer cartridge, replace

the developer and try to print out.

2. Check the approved voltage of the supply

roller and contact of the terminal and adjust

if necessary.

4.10.12 Ghost (4)

• Description Ghost occurs at 70 mm intervals.

Digital Printer

56.1 mm

Check and Cause Solution

The temperature of the fuser is maintained

high.

1. Disassemble the fuser and remove the

contaminated toner particles on the roller

and clean the foreign matter between

Thermistor and Heat roller.

( Caution: can be deformed)

4.10.13 Satins on the Face of Page

• Description The background on the face of the printed page is stained.

Digital Printer

Check and Cause Solution

1. Toner leakage due to improperly sealed

developer.

2. If the transfer roller is contaminated, satins

on the face of page will occur.

1. Replace the developer cartridge.

2. If the transfer roller is contaminated, run PC

Cleaning Mode Print 2 or 3 times.

And perform Self-Test 2 or 3 times to

remove contamination.

Questions and Answers:

Need help?

Do you have a question about the Samsung SCX-4216F Series and is the answer not in the manual?

Samsung SCX-4216F Series Specifications

General