To Next PageTo Next PageWhat does 'Toner Exhausted Replace Toner' mean on my Samsung SCX-4300?
The 'Toner Exhausted Replace Toner' message on your Samsung All in One Printer means you should replace the toner cartridge with a new one.
What to do for 'Toner Low' message on Samsung All in One Printer?
When you see a 'Toner Low' message on your Samsung All in One Printer, take out the toner cartridge and gently shake it. By doing this, you can temporarily reestablish printing operations.
What does 'Jam 1 or Install Toner' mean on Samsung SCX-4300 All in One Printer?
The message 'Jam 1 or Install Toner' on your Samsung All in One Printer means: * Install the Samsung genuine toner cartridge designed for your machine. Otherwise reinstall toner cartridge at several times. * Clean the paper jam.
How to fix 'Invalid Toner' error on Samsung All in One Printer?
If you receive an 'Invalid Toner' error on your Samsung All in One Printer, you must use a Samsung approved cartridge.
Why is the scanner not working on my Samsung SCX-4300 All in One Printer?
Here are some possible reasons why the scanner on your Samsung All in One Printer might not be working: * Make sure that you place the document to be scanned face down on the document glass. * There may not be enough available memory to hold the document you want to scan. Try the Prescan function to see if that works. Try lowering the scan resolution rate. * Check that the USB cable is connected properly. * Make sure that the USB cable is not defective. Switch the cable with a known good cable. If necessary, replace the cable.
How to fix 'Door Open' error on Samsung All in One Printer?
If you are getting a 'Door Open' error on your Samsung All in One Printer, close the cover until it locks into place.
How to solve USB connection error on Samsung SCX-4300?
If you are experiencing repeated errors when printing with a USB connection on your Samsung All in One Printer, change the USB mode to Slow.
Why is the text wrong when printing from Samsung All in One Printer?
If your Samsung All in One Printer is printing text that is wrong, garbled, or incomplete, it could be due to: * The printer cable is loose or defective. Disconnect the printer cable and reconnect it. * The wrong printer driver was selected. Check the application’s printer selection menu to ensure that your machine is selected. * The software application is malfunctioning. Try printing a job from another application. * The operating system is malfunctioning. Exit Windows and reboot the computer.
Why does my Samsung SCX-4300 All in One Printer print blank pages?
If your Samsung All in One Printer is printing blank pages, the toner cartridge may be defective or out of toner. Redistribute the toner, if necessary. If that doesn't work, replace the toner cartridge.
Why does my Samsung SCX-4300 All in One Printer use the wrong paper source?
If your Samsung All in One Printer selects print materials from the wrong paper source, the paper source selection in the printer properties may be incorrect. Select the correct paper source.
General| Print Technology | Laser |
|---|---|
| Print Speed | Up to 18 ppm |
| Print Resolution | Up to 600 x 600 dpi |
| Scan Resolution (Enhanced) | Up to 4800 x 4800 dpi |
| Copy Speed | Up to 18 cpm |
| Copy Resolution | Up to 600 x 600 dpi |
| Paper Input Capacity | 150 sheets |
| Paper Output Capacity | 100 sheets |
| Memory | 8 MB |
| Interface | USB 2.0 |
| Functions | Print, Copy, Scan |
| First Copy Out Time (Black) | Less than 12 seconds |
| Media Sizes Supported | A4, A5, Letter, Legal, Executive, Folio |
| Zoom Range | 50% to 200% |
| Operating Systems | Windows, Linux |
| Scan Resolution (Optical) | Up to 600 x 600 dpi |
| Duty Cycle | Up to 10, 000 pages per month |
