M
AINTENANCE
5.4
3
With a dry lint-free cloth, wipe away any dust and spilled toner from
the toner cartridge area and the toner cartridge cavity.
CAUTION
: To prevent damage to the toner cartridge, do not expose it to light
for more than a few minute. Cover it with a piece of paper, if necessary. Do not
touch the black transfer roller inside the machine.
4
Reinsert the toner cartridge and close the cover.
5
Plug in the power cord and turn the machine on.
Cleaning the Scan Unit
Keeping the scan unit clean helps ensure the best possible copies. We
suggest that you clean the scan unit at the start of each day and during the
day, as needed.
1
Slightly dampen a soft lint-free cloth or paper towel with water.
2
Open the control panel by gripping its bottom and pulling it upward.
To Next Page
Loading...
