Samsung SGH-E900 - Page 98

96
Menu functions
• IP address : enter the IP address of the proxy
server.
• Port : enter the port number of the proxy
server.
• Linger time : set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
• DNS : activate or deactivate the DNS (Domain
Name Server) addresses.
• DNS1 and DNS2 : enter the primary and
secondary DNS addresses.
• Bearer : select the network bearer type.
• Advanced settings : change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS :
APN : enter the access point name.
Login ID : enter the login ID.
Password : enter the login password.
When the bearer is set to GSM :
Dial number : enter the PPP phone number.
Login ID : enter the login ID.
Password : enter the login password.
Data call type : select a call type for data
transmission.
4. Press < Save > to save the profile.
Creating a streaming server profile
Setting up a streaming server profile may not be
available depending on your service provider.
1. Press < New >. If a profile has already been saved,
press < Options > and select Add new
connection .
2. Select Streaming settings .
3. Specify profile parameters:
• Profile name : enter a profile name.
• APN : enter the access point name.
• Login ID : enter the login ID.
• Password : enter the login password.
4. Press < Save > to save the profile.