124
Auto Turn Off
Setting an Anynet+Off
No / Yes
If Auto Turn Off is set to Yes
Search for Devices
Switching between Anynet+ Devices
1
Press the TOOLSAnynet+ (HDMI-CEC), and then press E
2
Select Select Device, and then press the E
Refresh
3
E
The Select DeviceAnynet+ (HDMI-CEC) to On in the System
SOURCE
cannot use the Anynet+
Anynet+Select Device
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
Auto Turn Off
On
No
–
To Next Page
Loading...
