Disassembly and Assembly
106
2 Remove the release film of a new front camera side adhesive tape (1 ea).
3 Align the tape with the left side of front camera hole vertically and attach it
accurately.
Gently press down the tape with the tweezers so that the tape can be attached well.
Be careful not to damage the near components.
4 Remove the release film of another new front camera side adhesive tape (1 ea).
5 Align the tape with the right side of front camera hole vertically and attach it
accurately.
Gently press down the tape with the tweezers so that the tape can be attached well.
Be careful not to damage the near components.
To Next Page
Loading...