Disassembly and Assembly
124
Charging Port Assembly
Leaving screws inside the device may damage internal components, such as the
battery. When assembling, be extra careful not to leave any unassembled screws
inside the device.
1 Using the tweezers, insert the charging port module to the bottom metal frame of
device, and press down on it in its position smoothly.
2 Connect the 2 flex cable connectors to the charging port.
Be careful not to damage the near components.
3 Check the screw 3428 (3 ea) at the 3 different points on the charging port and fasten
the 3 screws using the cross-head screwdriver.
Be careful not to damage the charging port module side contact.
To Next Page
Loading...