Disassembly and Assembly
85
Camera Remove
Disassemble the rear cameras only if rear cameras themselves require repairs.
1 Turn the separated main board over.
2 Using the opening pick, carefully separate the 4 rear camera connectors one by one.
•
Be careful not to drop the camera while disconnecting the connector.
•
Be careful not to damage the camera lens and near components.
•
Be careful not to damage the main board.
3 Using your fingers, separate the rear camera modules from the main board carefully,
and leave the camera lens facing up.
Be careful not to damage the camera and the main board.
To Next Page
Loading...