Disassembly and Assembly
121
6 Connect the front camera connector to the main board.
•
Be careful not to damage the camera.
•
Be careful not to damage the PBA and near components.
7 Check the screw 3428 (1 ea) and the black screw 3489 (1 ea) at the 2 different points
of camera frame and fasten them using a cross-head screwdriver.
•
Be careful to fasten the black screw on the right position when assembling.
•
When removing the screws, be careful not to damage the camera lens and PBA.
Black screw
Silver screw
To Next Page
Loading...