What to do if my Samsung Microwave Oven timer starts but there is no heat?
- CCindy HoustonAug 21, 2025
If the timer on your Samsung Microwave Oven starts counting down, but there is no microwave oscillation (no heat, while the oven lamp and fan motor turn on), it may be due to off-alignment of latch switches, an open or loose connection of the high voltage circuit (especially the magnetron filament circuit), defective high voltage components (H.V.Transformer, H.V. Capacitor, H.V.Diode, H.V.Fuse Magnetron), open or loose wiring of the power relay, a defective primary latch switch, or a defective power relay or Ass’y PCB. Adjust the door and latch switches. Check the high voltage component according to the component test procedure and replace it if it is defective. Replace the PCB main.