- 12 -
USER'S MANUAL
Reset
You can return to the factory defaults picture settings.
1. Press the MENU button to select the
Picture menu.
2. Press the ENTER or
button.
3. Press the
/
and ENTER button to select the
Reset menu .
4. Press the
/
button to select "OK" or "Cancel".
Press the ENTER button.
5. Press the MENU button to exit.
In VGA/HDMI mode,the picture menu will display
resolution information .
Mode: Standard,Music,Movie,Clear Voice,Custom
1. Press the MENU and
/
button to select the
Sound menu.
2. Press the ENTER or
button two times
3.
to select the
Mode menu.
/
and ENTER button to select the
setting you want.
USER'S MANUAL
Sound Menu
Picture Options
Move Enter Return
Sound
Mode :
Equalizer
Off
Reset
Move Enter Return
Standard
Music
Movie
Clear Voice
Custom
Picture
More
Picture Options
Reset :
OK
Cancel
Move Enter Return
Sound
Mode : Custom
Equalizer
Reset
Move Enter Return
SMT-1722-1922-Eng.indd 1:11 2009-7-16 10:57:03
Picture Options: Colour Tone/Size/
Digital NR/HDMI Black Level
Digital NR : Auto
HDMI Black Level
: Normal
Cool
Normal
Size
Move Enter Return
16:9
Under Scan
Zoom
4:3
button to select the
Picture menu.
2. Press the ENTER or
button.
3. Press the
/
and ENTER button to select the
Picture Options menu .
4. There are 4 sub menu:Colour Tone,Size,
Digital NR,HDMI Black Level.
5. Press the ENTER or
button.
Select the mode of Colour Tone:Cool,Normal,Warm1,
Warm2 by pressing button and ENTER button.
/
6. Select the Size menu,you can adjust picture in turn
by 16:9,Zoom,4:3,Under Scan.
1. Press the MENU
7.
The Digital NR menu includes :
Off, Low, Medium,
High,Auto.Only in the Video mode, the menu
Digital NR can be adjusted. Its default value is Medium.
8.
The HDMI Black Level menu includes : Normal, Low.
Only in the HDMI mode, the menu HDMI Black Level
can be adjusted. Its default value is Normal.
Warm1
Warm2
Size :
Colour Tone :
Sound Select : Main
Sound Select :
4.
Press the
Press the MENU button to exit.
In VGA Mode, "Under Scan" can not be adjusted.
To Next Page
Loading...
