Need help?Do you have a question about the Samsung SMT-1934 and is the answer not in the manual?
Explains warning symbols used in the manual for user safety.
Covers safe operation, handling, and environmental considerations for the monitor.
Guidelines for servicing, using correct replacement parts, and performing safety checks.
Information on FCC, IC, and California compliance, plus mercury lamp notice.
Details the items included in the monitor package and unpacking instructions.
Identifies and explains the function of the monitor's front panel buttons and sensors.
Describes the input/output ports located on the rear of the monitor.
Identifies the audio input ports located on the left side of the monitor.
Explains the 'No Signal' message and how to navigate the OSD menu.
Details how to adjust picture settings like Mode, Backlight, Contrast, and Brightness.
Covers image lock, fine-tuning, and screen positioning for optimal display.
Resets all picture settings to their factory default values.
Automatically adjusts PC screen settings for optimal display using the Auto Adjustment feature.
Adjusts Gamma and White Balance for fine-tuning picture quality.
Adjusts color tone, size, digital noise reduction, and HDMI black level.
Configures sound modes like Standard, Music, Movie, and Custom.
Adjusts audio frequencies and selects sound output.
Sets the display language for the On-Screen Display menus.
Configures blue screen display, startup melody, and power saving modes.
Enables and configures the Picture-in-Picture display feature.
Sets the source, size, and position for the Picture-in-Picture display.
Guides PC software setup and lists recommended display resolutions and frequencies.
Configures System ID and controls the display of the 'No Signal' message.
Manages input sources and allows custom naming of connected devices.
To Next Page
General
