How to fix Samsung SND-5011 access from a web browser?
If you cannot access the Samsung Security Camera from a web browser, ensure the camera's Network settings are correct, all network cables are properly connected, and, if using DHCP, the camera obtains dynamic IP addresses without issues. If connected to a Broadband Router, verify that port forwarding is correctly configured.
What to do if the Samsung Security Camera is not detected in the IP installer program?
If your Samsung Security Camera, connected to the network, isn't detected by the IP installer program, try turning off the firewall settings on your PC and then search for the camera again.
Why does my Samsung SND-5011 Security Camera viewer disconnect during monitoring?
If your Samsung Security Camera viewer gets disconnected during monitoring, check all network connections. Also, if the camera is connected over a PPPoE network, disconnections can occur under poor network conditions.
Why do Samsung SND-5011 Security Camera images overlap?
If images from your Samsung Security Camera overlap, check whether two or more cameras are set to a single multicast address instead of different addresses.
General| Brand | Samsung |
|---|---|
| Model | SND-5011 |
| Category | Security Camera |
| Language | English |
To Next Page
