Samsung SNOW-AAE - Advanced Settings

53
2nd 3rd Description
Advanced Settings Colour Adjust the colour saturation levels. Colour saturation intensifies as the value nears 100. (Range: 0~100)
Tint (G/R) Adjust the ratio of green to red tint levels. Increasing values intensifies the saturation of red and green colours. (Range: 0~50)
White Balance Adjust the colour temperature of the picture so that white objects appear brighter.
"
This function may not be supported depending on the model.
 2 Point
Adjust red, green, and blue luminosity levels in two sections for precise white balance optimisation.
 20 Point Settings
Controls the white balance in 20 point interval by adjusting the red, green, and blue brightness.
– 20 Point
Adjust red, green, and blue luminosity levels in twenty sections for precise white balance optimisation.
"
Some external devices may not support this function.
Gamma Adjust the mid-range brightness of the picture.
 HLG / ST.2084 / BT.1886
Adjust the HLG, ST.2084, BT.1886 levels of the picture.
"
Available functions may differ depending on the port type.
Contrast Enhancer Automatically balance the contrast to prevent excessive differences between bright and dark areas.
Black Tone Select the black level to adjust the screen depth.
Flesh Tone Adjust the flesh tone colour by increasing or decreasing red levels.
RGB Only Mode Fine-tune the saturation and tint of the red, green, and blue colour channels.
Colour Space Settings Configure colour space settings to refine the spectrum of colours on your screen.
 Colour Space
Choose a colour space.
"
To adjust Colour, Red, Green, Blue and Reset, set Colour Space to Custom.