83
Preset Timing Modes
"
This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a
resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution
specified for your product.
"
When Input Signal Plus is set to On, up to the 7680 x 4320 @ 60 Hz resolution is supported. When Input Signal Plus is set to Off, up to the 3840 x 2160 @
60 Hz resolution is supported.
Model Name SNOW-AAE (SBB-SNOWAAE/**, SBB-SNOWAAEX**)
Synchronization
Horizontal Frequency
30 ~ 264 kHz (DP, HDMI 4), 30 ~ 135 kHz (HDMI 1~3)
Vertical Frequency
24 ~ 120 Hz
Resolution
Optimum Resolution
3840 x 2160 @ 60 Hz
Maximum Resolution
7680 x 4320 @ 60 Hz (DP, HDMI 4), 3840 x 2160 @ 60 Hz (HDMI 1~3)
The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC. If the signal
transmitted from the PC does not belong to the standard signal modes, the screen may be blank with the power indicator on. In such a case, change the
settings according to the following table by referring to the graphics card user manual.
Resolution
Horizontal Frequency
(kHz)
Vertical Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
HDMI 1~3 HDMI 4 DP Multi View
IBM/VESA, 640 x 480 31.469 59.940 21.175 N / N O O O O
Mac, 640 x 480 35.000 66.667 30.240 N / N O O O X
VESA, 640 x 480 37.861 72.809 31.500 N / N O O O X
VESA, 640 x 480 37.500 75.000 31.500 N / N O O O X
IBM, 720 x 400 31.469 70.087 28.322 N / P O O O X
VESA, 800 x 600 35.156 56.250 36.000 P / P X X O X
VESA, 800 x 600 37.879 60.317 40.000 P / P O O O O
"
Horizontal Frequency
The time required to scan a single
line from the left to the right side
of the screen is called a horizontal
cycle. The reciprocal number of a
horizontal cycle is called horizontal
frequency. Horizontal frequency is
measured in kHz.
"
Vertical Frequency
The product displays a single image
multiple times per second (like a
the viewer sees. The rate of a single
image being displayed repeatedly per
second is called vertical frequency
or refresh rate. Vertical frequency is
measured in Hz.
To Next Page
Loading...
