Samsung SNOW-AAE - LED HDR; Picture Options

56
2nd 3rd Description
LED HDR Set options to provide an optimal HDR effect.
When using multiple S-Boxes, if you set LED HDR to On, the images qualities of the S-Box outputs may differ. To prevent this,
set the sub functions of LED HDR to Off.
Inverse Tone Mapping Make the dark elements of the image darker and the bright elements brighter to make the image as realistic as possible.
Dynamic Peaking Enlarge the difference of instantaneous maximum/minimum luminance so that the bright parts can be expressed more
clearly.
Eco Image Enhancer Enhance the video quality and reduce power consumption by lowering LED brightness and increasing the gap between the
min/max value of instant brightness.
"
Available only when Dynamic Peaking is set to On.
"
Enabled only when connect to supported model.
Colour Mapping Map the colour of the specific source image to the colour of the target image in order to convert it to the desired colour.
Picture Options Colour Tone Select the colour tone that best suits your viewing preferences.
"
Settings can be adjusted and stored for each external device connected to an input on the product.
"
Available options may vary depending on the product.
Digital Clean View Reduce picture noise to avoid distractions such as flickering.
HDMI Black Level Adjust the black level to optimise the HDMI picture brightness and contrast.
Film Mode Make frame transitions from older video sources smoother. This function is only available when the input signal is TV, AV,
Component (480i, 1080i), or HDMI (1080i).
Auto Motion Plus Settings Enhance picture sharpness to optimise for fast-moving images.
 Auto Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture.
The menu names may vary depending on the country.
Apply Picture Settings Apply the picture settings to all external devices connected to the device or to the current source only.
Reset Picture Restore all picture settings to the factory default.